Pressure Washing in Naples, FL by Naples Premier Pavers Protection. Driveways, walkways and pool decks washed back to clean paver, removing mold, algae and stains without damaging the surface.
What you are actually buying
Humidity in Naples means mold and algae build up on paver surfaces fast, especially in shaded spots and anywhere water sits after rain. Left alone, that buildup turns a light gray film into deep black staining that works its way into the paver texture and gets harder to remove every month it sits.
The risk with pressure washing pavers is using too much pressure or the wrong nozzle. That etches the paver surface, chips edges, and blasts joint sand right out, which then leaves gaps for weeds to grow into. A rushed job also skips checking for oil stains, rust from irrigation heads, or efflorescence, and just runs the wand over everything the same way, which does not actually lift those stains.
A proper wash uses the right pressure for the paver material, treats stains before washing rather than trying to blast them out, and checks joint sand afterward so it can be topped off if needed. The goal is a surface that looks clean without wearing down the paver finish underneath it.
What the job includes
- Full inspection for mold, algae, oil stains, rust and efflorescence before washing
- Pretreatment of stains that pressure alone will not lift
- Surface wash at a pressure matched to the paver material
- Careful attention around joints to avoid blasting out sand
- Rinse and final inspection for missed spots or damage
- Recommendation on joint sand top-off if levels are low
How it runs
-
Inspect
We check the surface for stain type, joint sand condition, and any loose or damaged pavers before starting.
-
Pretreat
Oil, rust or algae stains get treated with the right cleaner before any washing begins.
-
Wash
The surface is washed at a pressure suited to the paver type, working section by section for even results.
-
Check joints
We check whether joint sand has been disturbed and flag it if a refill is needed.
-
Rinse and review
A final rinse clears debris and we walk the surface to confirm the finish is even and clean.
Pressure Washing near you
Serving Naples, Marco Island, Bonita Springs and Estero. If your town is not on this list, call and ask. It is a short drive either way.
Questions about pressure washing
Can pressure washing damage my pavers?
It can if the pressure is too high or the wrong nozzle is used, which etches the surface and blasts out joint sand. Used correctly for the paver material, it cleans without wearing down the surface.
How often should pavers be pressure washed?
It depends on shade, drainage and how much algae or mold builds up on your specific surface. Areas that stay damp or shaded tend to need attention more often than open, sun-exposed driveways.
Will pressure washing remove rust stains from sprinklers?
Rust usually needs a specific pretreatment before washing, since pressure alone will not lift it out of the paver. We treat rust and oil stains separately from the general wash.
Should I reseal after pressure washing?
Washing opens the pores of the paver back up, which is actually a good time to reseal if the surface is due for it. We can look at joint sand and overall condition and let you know where things stand.
How long does paver sealing last?
Two coats of Cobble Loc over clean, re-sanded pavers gives up to five years of protection. Sun, rain and how much traffic the surface takes all move that number, so we tell you where yours stands when we look at it.
Do you re-sand the joints or just seal over them?
We re-sand. The joints get color matched Trident sand set with the wet sanding method before any sealer goes down. Sealing over empty or dirty joints is why pavers shift and weeds come back.
Other things we do
Pavers Sealing
Driveways, pool decks and patios in pavers, natural stone and marble. Cleaned, joints re-sanded, then a sealer that brings the color back or keeps stains and mold off the stone.
More on this →
Pavers Installation
New pavers laid for driveways, walkways, patios and pool decks, set for strength and for how the finished surface looks.
More on this →
Soft Wash
Low pressure and the right cleaning mix for screen cages, lanais and anything a pressure washer would damage.
More on this →